angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- The angle of inclination from the vertical of a vein, fault, or lode. Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
倾斜余角因矿脉，断层或矿井倾斜而与垂直面形成的角度大倾角斜井长曲线提升机运输施工技术 - Lower and raise the ramp to see how the angle of inclination affects the parallel forces acting on the file cabinet.
把斜坡抬高或放低，看倾斜角度如何影响文件盒上的平行作用力。 - We quantitatively analyze the casing damage, present the deformation of casing with the change of relative position of stratum and study the angle of inclination of stratum, the pressure of stratum, the size of soaked area and the hydration of marl.
以地层的相对错动表示套损变形情况，研究了地层倾角、地层压力、浸水域大小和泥岩水化情况改变对套损的影响。 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。 - In this paper, the license plate number of a wide range of tilt angle calculation means to conduct a large number of experiments, the final choice point by calculating the characters to determine the angle of inclination of the plate.
本文研究了多种计算车牌号倾斜角的方法，进行了大量的实验，最终选择通过计算字符中心点来确定车牌的倾斜角。 - The emphasis of the analysis is put on the effects of the angle of inclination of the concentrated force upon the deformed shape, the load-deflection relationship and the length of the plastic region.
着重讨论了集中力的倾角对弯曲形状、载荷&挠度关系及塑性区长度的影响。 - It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
现场检测数据显示，该抗风柱基础施工偏差略大于允许值，连接抗风柱的垫板约有140°倾斜。 - When the speed is big, it is good to have a certain angle of elevation, on the contrary, it need not have the angle of elevation; it is suitable for the radial angle of inclination of the scavenging port to be 20 ° or so.
当转速较大时适合有一定的仰角，反之，则不必有仰角；扫气口的径向倾斜角设计在20°左右比较合适。 - Any of numerous hand tools for boring holes. Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination
钻孔工具，手钻钻孔用的手持工具反井钻开挖大倾角斜井导孔的工程实践 - Please consult with your local supplier about the best angle of inclination.
关于最佳倾斜角度的具体信息，请咨询当地的经销商。